The Beauty of Concrete Stain

Concrete is a common building material for paths, retaining walls, floor slabs and precast concrete walls and beams used in commercial construction. One disadvantage of concrete is that it is highly porous this means it will discolour easily and will show water, dirt and other damage. A solution to enhance the appearance of both new and existing concrete is the application of a concrete stain.

Concrete stain is not a paint it is a chemical reaction with the cement materials penetrating the concrete and thus provides a long-lasting colouring solution that resists fading or scratching and won’t peel. Traditional concrete stains are created by acid etching of concrete. This involves a water-based solution of hydrochloric acid and inorganic salts which reacts with minerals and lime in the concrete aggregate, and as a result colouring occurs. The colour profile appears like marbling with brown and green tones with a natural variation caused by the combination reaction with the concrete.

It is quite difficult to achieve a professional result without the help of an experienced contractor but acid etching is long-lasting and can be applied to new or old concrete. Typically acid staining is used on concrete floors and then a sealer is applied to further protect the concrete.

Modern concrete colour staining offers a lot more versatility but effective applies a similar chemical reaction to allow the stain to penetrate unsealed concrete and react with the surface to form a deep and permanent colouring. The real beauty of modern stain is the vast array of colours and effects that can be achieved providing an almost unlimited colour palette plus precisely controlled colour variation to achieve a natural effect.

Newlook concrete Stain offers stains that can be combined with a two-part coating such as epoxy, polyurethanes or acrylic sealers or a solid colour stain that requires no sealer. The solid colour stain can be used on concrete slabs, vertical surfaces, concrete blocks, pavers, imprinted concrete, exposed aggregate, and most cementitious surfaces. It can be used with stencils or sand-blasted to achieve patterned effects on both interior and exterior concrete. A further translucent enhancer can be applied to achieve a natural tint or aged effect.

Nawkaw stain penetrates concrete, cladding and masonry walling surfaces to provide a long-lasting weather and UV resistant colouring solution. Nawkaw can be used to restore discoloured or faded concrete and masonry and can be colour matched to existing colour schemes. It penetrates the substrate bonding with the structure and thus will never crack or peel like paint.

Concrete stain is a superior colouring method for concrete and masonry resulting in a durable, weather resistant and attractive concrete finish. Unlike paint it will not crack or peel and provides a smooth, breathable permanent colour to both interior and exterior concrete or masonry walls, floors and precast structures.

Get More Bang for Your Buck with Clean Solar Energy Today

America today has strived to find innovative ways to reduce the country’s carbon footprint and seek out clean, go-green, alternative energy sources for a better tomorrow. One energy-saving method that has become a popular choice for residents and business owners is the use of solar panels. Solar panels are used to collect energy from the sun that eventually is used for electrical needs. This energy source isn’t only popular for its go-green mantra but is ideal for home and business owners looking to save money.

Tax Credit Incentives for Taxpayers

One of the great savings, business, and homeowners can look forward to during tax season is applying for the federal solar tax credit, also known as the Investment Tax Credit (ITC). This credit makes “going solar” more affordable because it grants a dollar-for-dollar tax deduction equal to 30% of the total cost of a solar energy system. That means that 30% of the cost it took for an installation to take place will be reduced the overall federal tax burden. It is important for home and business owners to understand that they are only eligible for the Investment Tax Credit (ITC) if he or she OWNS the solar system, rather than lease it. If a contract is signed, the third-party owner will receive the tax credit associated with the solar system.

Can solar panels save me or my business money?

This question is asked more often than not. Many individuals believe that the cost of installation and overall care will far outweigh the savings that may come from using solar power energy. But it has been found that going solar can eliminate an electric bill entirely or reduce it dramatically. Of course, these savings with solar depend on a few different factors, like how much energy the system produces and how much the home or business consumes, but the biggest factor is the rates that would otherwise be paid to public utility.

The savings for going solar are also not instant; they will slowly take time to see the results from the investment made. In Utah, the total savings in electricity was nearly $21,000 after 20 years. Going solar will affect finances but in a good way. A helpful consideration is to look at how much it can save a home or business owner and how soon he or she can start saving. Get started today and find out what it means to “Go Green.”

Kitchen Remodel Tips to Help You Achieve Your Dream Kitchen

When assessing their home for upgrades, many homeowners hope to remodel their kitchen to create an open and inviting space. As you may have noticed, kitchens are not only used for cooking; kitchens have evolved to be part of the main entertaining space in the home. When planning a kitchen remodel, it is always helpful to look at ideas to help you get an idea of what you want. Here are some kitchen remodel tips:

Planning the Kitchen Layout

Typically, one of the first steps when planning a kitchen remodel is deciding on the kitchen layout. It is important to create enough space between walkways and high-traffic areas. In cooking zones, there should be 42 inches of space for a one-cook configuration and 48 inches for a two-cook configuration. Another important tip when choosing your kitchen layout is to be mindful of the location of your cabinetry, appliances, and how the two interact. You don’t want to open a cabinet door to find out that it bangs into an appliance, or another cabinet, and ending up with damaged materials.

Choosing the Appliances

When planning the location of your appliances, try to avoid installing the cooktop in the island. It can be a hazard, especially for homeowners with kids. Additionally, it may be a good idea to have the refrigerator installed near the edge of the main cooking area (such as on the end of a row of cabinets). That way, the cook can easily access ingredients in the refrigerator, while a passer-by can also access the refrigerator for snacks or drinks without disrupting the cook.

Planning for Ample Countertop Space

Account for lots of countertop space. Countertop space is essential for prepping food, storing small appliances, and setting down miscellaneous items. One area of the kitchen that should have countertop space on either side is the cooktop. The landing space around this area is priceless while cooking. Another area that would benefit by having extra countertop space would be the microwave.

Deciding on Cabinetry

In a kitchen, there are many items that need to be stored away, which is why organization is a must-have. We recommend including some cabinet organization. Some good ideas for in-cabinet organization would be a knife drawer, a recycling bin, and racks for pots and pans.

In addition, avoid weighing down the room with an overabundance of cabinetry by mixing up cabinet details. For example, you can replace a regular wall cabinet with a couple of open shelves to show off your prettiest glassware. However, if you still need as much cabinet space as possible, try including some glass panels in your cabinets to make the room appear lighter.

Choosing the Finishing Touches

On a budget? Before you get too discouraged about not being able to include your dream materials or finishes, know that it is possible to include some high-end pieces while staying on a budget. We recommend choosing one or two high-end items, such as tiles for your backsplash or a range-hood that you love. Then, you can use these items as your focal points. Stick to the budget by saving money on your countertops, cabinetry, and other materials.

Kitchens are often considered the heart of the home, and the center for entertaining with family and friends. Before you invest in a complete kitchen remodel, it is important to research what you want beforehand. You don’t want to go through an entire remodel to find out that you do not absolutely love your new space. Some important elements to consider when compiling kitchen remodel tips include: layout, cabinetry, countertops, appliances, and finishing touches.

We hope that these kitchen remodel tips helped you in planning your dream kitchen. Feel free to contact Balducci Additions and Remodeling to schedule an appointment.

Pros and Cons of Replacing a Bathtub with a Shower

The idea of a calming bubble bath at the end of a stressful day might be appealing; however, how often are we able to indulge and take the time to enjoy our own spa-like bath? For most people, it happens very rarely or not often at all. Some homeowners may consider baths to be a waste since they are not used. Before converting your tub to a shower, consider the pros and cons of this option.


Easier to access. In addition to extra elbow room, larger showers may be handicap accessible; which means that your home may be a place for you to age in place. A large shower, especially those without showers doors, are much easier to access than climbing over the tub.

Turning your bath into a shower can conserve water (depending on the amount of time) and save you money. According to the United State Environmental Protection Agency, “a full bathtub can require up to 70 gallons of water, while taking a 5-minute shower uses only 10 to 25 gallons.”

Can add extra square footage to your bathroom. Some showers take up less space than baths, which will free up some of the unused space from a tub.


Converting from a tub to a shower can hinder your resale value. This is especially true if you are converting the only tub in your home. It is a major drawback to families with small children.

Showers have the potential to use more water than a bath depending on the amount of time you spend in the shower. Generally, if your shower lasts longer than 10 minutes it uses more water than a tub. Good news is that the average American takes about an 8 minute shower.

Improve the Look of your Kitchen by Using Splashbacks

If you are looking for some improvements in your kitchen or want your kitchen to look beautiful then you should think about splashbacks. Splashbacks are one of the several ways to improve the look and feel of your kitchen. It helps you in keeping your kitchen clean and organised. Splashbacks not only makes a kitchen look expensive but are also safe and hygienic. Depending on your choice and budget, Splashbacks can improve your kitchen’s overall design and make your kitchen look expensive. If you have good tradie skills you can also install splashbacks on your own. There is a variety of options available in the market where you can DIY the installation of splashbacks. DIY installation of splashbacks reduces cost but is advisable only if you are confident and have good amount of spare time.
If you are thinking of renovating your kitchen then think about the splashbacks. Splashbacks may change the looks of your kitchen completely without altering most of the things in the kitchen. Depending on your likes and budget, you can choose the type of Splashback to be installed. There are mainly 7 types of Splashbacks depending on the product used. They are:


There was a time when Tiles were the most common product being used in Splashbacks but due to low options in color and material, they disappeared from the market. But thanks to range of colors, pattern and materials, Tiles are now seeing a big comeback. Another reason for their comeback may be their cost, as they are low priced and easy to install.

Toughened Glass

Toughened glass splashbacks are the most popular splashbacks at the moment. They are easy to clean and have unlimited color options. The glass used is toughened so the glass can withstand any shock and heat from the cooktops. Another reason to use toughened glass is safety; as if it gets broken it crumbles into small granular pieces instead of sharp objects. There are unlimited colors to choose from. You can choose coloured glass splashbacks depending on the color of wall and your likes. For kitchen glass splashbacks is the most popular type. Instead of glass you can also have your digitally printed image at the back of the glass.

Mirrored Glass

Mirror splashbacks are reflective glass splashback suitable for using in wet areas like kitchens and bathroom. They are gradually becoming very popular choice. A mirror splashback is a reflective glass splashback that is suitable for using in kitchens and other wet areas. They are made from toughened glass and are corrosion free. They are water and steam resistant and are available in different colours including silver, smoke, bronze and graphite.


Acrylic splashbacks are one of the most cost effective splashbacks which gives the illusion of glass and with installation you could go for a DIY option. One of the major problems with Acrylic splashbacks is they cannot be installed directly behind cooktops. You can use toughened glass or stainless steel plates as additional protection. Acrylic splashbacks are easy to install and no specialised tools are required.


Stone can also be used as splashback material. It’s uncommon in Australia but very popular in Europe and Asia. The stone comes in wide variety of colors and texture. Stone is shock and heat proof and gives elegant look in the kitchen. Stone cutting may need special tools so it’s advisable to seek professional’s help while installations.

Pressed metal

You will find many people who love pressed metal splashbacks. Pressed metal comes with many different patterns and can be installed in almost any kitchen. Pressed metal splashbacks are usually made up of Aluminium alloy which won’t rust. They are easy to install and the installation can be done on DIY basis. The pressed metal sheets can be painted in any color to match your kitchen.

Stainless Steel

Stainless steel splashbacks are most common in commercial kitchens. It gives a contemporary industrial feel to a kitchen. It’s hygienic and highly durable which makes it best option for commercial kitchens. You can install stainless steel splashbacks by yourself. You can buy stainless steel sheets from the store and cut it to the size with no specialised tools. Stainless steel splashbacks are also used in combination of acrylic or tiles splashbacks.

Splashbacks are essentials in kitchens and wet areas and improve the look and feel of the surroundings. They are now being used in other parts of home like bathrooms, bedrooms and lounges. You can inset lights to improve the looks of splashbacks. Splashbacks are widely used in kitchens because they are safe and hygienic. They are designed to be oil, water and stain resistant. They are also easy to clean and cleaning can be done using a damp cloth.

5 Home Improvement Tips For Winter

Winter is just around the corner and it is well past time to begin preparations for the harsh, cold weather. Being a homeowner comes with lots of responsibilities and one of those is winterizing your home. Below you will discover 5 home improvement tips that will get you ahead of Father Winter.

Cleaning Gutters

One of the most dreaded tasks that a homeowner will be forced to tackle is gutter cleaning. Not only do you have to drag that heavy ladder all the way around your home, but you have to clean those smelly dying leaves out of the gutter. If you fail to complete this task, before the onset of winter, your gutters may become so full and heavy that they will crumble to the ground.

You can purchase a gutter cleaning tool that attaches to your water hose, so you clean the gutters from the ground. Of course, there is one downside to using this tool, which is its inability to get rid of the soggy leaves, which tend to stick to the bottom of the gutter. It seems that your best bet will be to climb that ladder and manually dip the leaves out.

Clean Decks

Many homeowners choose the fall season to clean their decks. If you reside around a lot of trees, you will definitely notice a buildup of mossy and sappy residue on your decks. This can become very hazardous, especially when wet, so to decrease the risks of falls, you should scrub your decks clean.

You will find many over the counter deck cleaning solutions at your local big box store. It may be a good idea to pick up a stiff bristled broom, as well.

Air Conditioning Duct

It is time for air conditioning duct cleaning again. Now you may need to hire a professional HVAC service technician to properly clean your ducts. Another option that may be open to you is renting a duct cleaning machine. While this will be a timely task, it will save you a lot of money that can be used for Christmas holiday shopping.


To cut down on energy wastes, you should caulk around your doors, windows, and indoor/outdoor plumbing pipes. You would be surprised with how much warm air could escape in and out of your home through these tiny crevices. By caulking gaps, cracks, and crevices in and around your home, you will be saving on energy wastes and preventing your energy bill from soaring out of control.

Repairing Leaky Faucets

Water wastes are not only harmful for the environment, but it can damage the wallet. Instead of watching those faucets drip, you should head to the big box store and purchase some plumbing supplies. While you are at it, be sure to fix those outdoor spigots, because you definitely do not want them to freeze up this winter.


4 Reasons You Should Get Faux Wood Blinds

Choosing new blinds for the home is an exciting process, but it can also be difficult as there are so many options for blinds available today. Two of the main types of blinds you can get for your home are real wood and faux wood, and knowing the advantages of each can help you immensely in making your decision. Last month on the blog we discussed 4 advantages of real wood blinds. Now, here are 4 advantages of faux wood blinds, so you can decide if faux wood blinds are the best fit for your home.

Lower Cost

Because faux wood is manufactured and does not involve harvesting real wood, they are lower in cost than wood blinds. Faux wood blinds are a great option for those who want the look of real wood but don’t want to spend the extra money on real wood blinds. Despite their lower cost, faux wood blinds still come in many high-quality options.

More Moisture Resistant

Faux wood blinds tend to be more resistant to moisture than wood blinds are. Why? The synthetic materials in faux wood are more capable of standing up to frequent exposure to moisture and even to being sprayed with water. Because of this, faux wood blinds are an especially great option in more humid climates and in areas such as the bathroom that see a great deal of humidity and water spillage. Wood blinds used in these special circumstances, on the other hand, could lose their protective finish over time and eventually start to warp after exposure to excessive moisture.

Easier to Maintain

On a similar note, the moisture resistant qualities of faux wood mean that blinds made from faux wood are easier to maintain. They can withstand wet household cleaners and even being sprayed down with a hose.

Environmentally Friendly

Because faux wood blinds are made from synthetic materials, their manufacturing process does not involve quite the environmental impact that the manufacture of wood blinds does. Faux wood blinds, made from either vinyl or a combination of wood and synthetic materials, greatly help to reduce the number of trees being cut down, and they are even fully recyclable.

Faux wood blinds can be an excellent and beautiful part of any home’s window treatments. If you’re wondering what faux wood blinds might look like in your home, head over to the faux wood blinds section of our website for some inspiration.